Shackleton AEW2

White vac formed plastic sheet in 1mm - 1.25mm -1.5mm or 2mm thickness. Crystal clear cockpit canopies, turrets, etc as required. High quality cast METAL fittings such as propellers, seats, engines, undercarriage legs, radiators, wheels, guns, aerials, etc as required. Computer drawn and printer controlled decals. Assembly drawings and instructions.

PLASTIC PARTS LISTING: Note that there are some part supply differences between
aircraft Marks

FUSELAGE Port	FIN Port Inner	PROP SPINNERS Port x 2	U/C WHEELS x 4 Halves
FUSELAGE Stbd	FIN Stbd Outer	PROP SPINNERS Stbd x 2	NOSE UNDER RADOM
WING Port Top	FIN Stbd Inner	NOSE WHEEL LEG Upper
WING Port Bottom	NAC' Outer Stbd Inner Half	ENGINE FRONT DISCS x 4
WING Stbd Top	NAC' Outer Stbd Outer Half	ENGINE FRONT BOSS x 4	CLEAR PARTS
WING Stbd Bottom	NAC' Inner Stbd Inner Half	BOMB BAY FLOOR	COCKPIT CANOPY
TAILPLANE Port Top	NAC' Inner Stbd Outer Half	NACELLE U/C FLOOR Port	ASTRO DOME
TAILPLANE Port Bottom	NAC' Inner Port Inner Half	NACELLE U/C FLOOR Stbd	NOSE CANOPY
TAILPLANE Stbd Top	NAC' Inner Port Outer Half	TIP TANK Port x 2 Halves	NOSE TURRET
TAILPLANE Stbd Bottom	NAC' Outer Port Inner Half	TIP TANK Stbd x 2 Halves	REAR FUSE CANOPY
FIN Port Outer	NAC' Outer Port Outer Half	U/C WHEELS x 4 Halves	BLISTERS x 2

METAL PARTS LISTING. Note that there are some part supply differences between
aircraft Marks

PROPELLER BLADES x 24	U/C MAIN LEG x 2	TAILWHEELS x2	WHEEL INSERTS x 4
EXHAUST PIPES Port x 4	U/C MAIN LEG SUPPORT x 2	GUNS x 2	ECM Top
EXHAUST PIPES Stbd x 4	TAILWHEEL x 2	SEATS x 2	CONTROL COLUMNS x 2

1/. SUPPLIED WITH 4 DRAWING /INSTRUCTION SHEETS

2/. FULL DECAL SHEET, INCLUDING THE YELLOW WALK LINES FOR THE WINGS

DECALS FOR WR960 'Dougal' + WL757 'Brian' + WL747 ' Florence' Including 'YELLOW LINES' 'ROYAL AIR FORCE' Etc

A REALLY BEAUTIFULLY BUILT AVRO SHACKLETON AEW-2 WHICH DOES CREDIT TO THE KIT BUILDER Tom Probert TO WHOM I ARE INDEBTED FOR ALLOWING us TO USE HIS PHOTOGRAPHS OF THE KIT

All in all a very, very enjoyable build, and on the whole straightforward. So much so in fact, it won't be long before I build a MR3 to accompany her! I must say this was an incredibly enjoyable build - so much so in fact I've just bought your MR3 version too!
My next project of yours is going to be the Merlin Halifax in 1/48th - it looks very nice indeed.

How is the Vulcan progressing? I'm literally salivating at the prospect!

Whilst endeavouring to produce an accurate Web site, if you find any errors please let us know and I will try to correct as necessary
Errors & Omissions Excepted Throughout the whole Web Site. All contents subject to change without prior notification.
Please ensure the suitability of goods before ordering and any returns are at customers expense and less original postage & any import duty.
I shall not be held liable for any injury, direct or consequential, arising from the use of, handling of or inability to use any of my products.
I would also like to express my sincere thanks to all my customers who have so generously allowed us to use their photographs of their built models from my kits.
If you have built any of my kits and would like to feature them on my site, please let us know.
Please note that there has been an increase in kit prices because of the recent Plastic & METAL increases
Kit are NOT suitable for children Please note that there has been an increase in kit prices because of the recent Plastic & METAL increases
Kit are NOT suitable for children
.